solid point
英 [ˈsɒlɪd pɔɪnt]
美 [ˈsɑːlɪd pɔɪnt]
网络 凝固点
双语例句
- Inserting the right talent into the right kind of environment can certainly serve as a solid starting point.
推行一项改革，首先要做的就是让公司的各类人才适得其所，这样的改革才会拥有稳固的根基。 - Milk does not keep long in hot weather heat absorbed by a unit mass of a solid at its melting point in order to convert the solid into a liquid at the same temperature.
牛奶在热天容易变质。在熔点时一单位质量的固体为使其在同一温度下变成液体所吸收的热。 - The solid state drive's thickest point is the4mm SATA connector.
固态驱动器的4毫米厚的一点是SATA连接器。 - The results show that due to the strong jet impingement on the narrow face in mold, solid shell near the impingement point is very thin.
研究表明，钢液对结晶器窄面的冲击严重，导致在冲击点附近的凝固坯壳较薄。 - Lumen: The unit for measuring luminous flux. One lumen is the flux emitted in one solid angle by a point light source of one candela.
流明：量度光通量的单位。1流明是由1烛光的点光源在1立体角内所发出的通量。 - On a personal note, I understand the frustration he is trying to convey here but you need to find a better outlet if you ever intend to make a solid point.
劝你一句，英语不好就不要在这里卖弄。因为你在这里发英语的话，要不就是别人看不懂，要不就是把你的错误全部找出来。 - A cone is a solid body which narrow to a point from a round, flat base.
圆锥体是底面圆平顶尖的实体。 - Can you write the full stop of Chinese as a solid point.
你不能把汉语的句点点成实心点。 - Contact angle: The angle made by a drop of liquid with a solid at the point of intersection.
接触角：一滴液体和固体接触时所造成的角度。 - A Modern Feminist View of The Hours; Contact angle: The angle made by a drop of liquid with a solid at the point of intersection.
现代女权主义视角下的小说《时时刻刻》接触角：一滴液体和固体接触时所造成的角度。 - For the flow of a jet or a wake, we may consider a flow field without solid boundary but with a point of inflection in the velocity profile.
射流或尾流可视为无固壁边界而流场速度剖面具有拐点的流动。 - The teachers must make a good analysis about Question Teaching, confirm the requirement of the students 'questions, aim at the teaching format of solid configuration, and point out that both actuality and expansibility are the most basic core principles.
问题教学必须对学生的问题采取立体结构的教学形式；实际性与发展性是实施问题教学策略的最基本、最核心的创境原则。 - A mathematical model for predicting the cold filter plugging point and solid point of blended diesel fuel
预测轻柴油冷滤点和凝点的数学模型 - Technology of down hole solid paraffin inhibition pour point depression pipe
油井井下固体防蜡降凝管技术 - The predicted cold filter plugging point and the solid point were in coincidence with the measured results. Rapid Determination of the Cold Filter Plugging Point of Diesel Fuel by DSC Analysis
对炼油厂的柴油调合油进行了模拟计算，计算结果表明预测值与实测值有较好的一致性利用DSC快速测定柴油冷滤点 - The Application of On-Line Quality Prediction& Predicting the Solid Point of Atmospheric Second Line Oil of North Distillation Unit of Fushun No.2 Refinery
在线质量预测技术的应用&抚顺石油二厂北蒸馏常二线凝点预测 - The product, under this conditions, was a white flour solid and the melting point was 146 ℃& 148 ℃, the yield of the product was about 93%.
在适宜工艺条件下所制得的产品为白色粉末状固体，熔点为146℃~148℃，产率约为93%。 - The product was red powder solid with melting point 188~ 190 ℃. The yield of product was over 88%.
在此条件下得到红色的粉末固体，熔点为188~190℃，产率在88%以上。 - In this paper the theoretical and practical requirement of concept change from solid Earth view point to liquid ( especially gas) Earth one is emphasized.
在本文中主要探讨从过去的固体地球观向今后流体（特别是气体）地球观转变的实际和理论上的必要性； - The 8 node solid element with an one point quadrature is used for the model of grinding wheel, flange, spindle and bearing.
砂轮、法兰、主轴及支座采用一点积分的8节点实体单元。 - The phase compositions include Al-based solid solution, low melting point eutectic ( Pb_7Bi_3+ Bi) and θ′ CuAl_2 precipitates.
合金的物相组成为铝基固溶体、低熔点相Pb7Bi3和Bi以及主要强化相CuAl2。 - Analysis for the Horizontal Component of the Solid Tide in the Fixed Point Deformation Station of Shanxi Province
山西定点形变台站固体潮水平分量研究 - A mathematical model based on the distillation data of diesel components was developed to predict the cold filter plugging point and solid point of the blended diesel fuels.
建立了一种以柴油组分油的恩氏蒸馏数据为基础的数学关系式，用于预测柴油调合油的冷滤点及凝点。 - Correction of Solid us and Point H in the Fe-C Binary Phase Diagram by Using the Melting Heat of Iron
用铁的熔化热校正铁碳相图固相线及H点的研究 - The production process, application and development prospects of terpene-styrene resins are introduced. Under selected reaction conditions, solid resin with softening point 90~ 110 ℃, Gardner colour 2-3 and yield 92.9% has been produced.
叙述了改性萜烯树脂&萜烯苯乙烯树脂产品的生产工艺，产品软化点在90～110℃，颜色号为2～3，平均得率为92.9%，并介绍其应用范围以及发展前景。 - These studies will certainly contribute to the deeper understanding of the anticancer mechanism of these garlic organosulfur compounds and provide a solid starting point for the use of these compounds in the clinical treatment of non-small cell lung cancer.
这些研究将有助于人们更深入理解这三种大蒜有机硫化合物的抗肺癌的机制，为将来这三种有机硫化合物可能在非小细胞肺癌的临床应用提供了理论依据。 - With the enhancement of environmental consciousness, the administration of the water pollution and regeneration of the solid wastes are the focal point of present environmental protection.
随着环保意识的增强，对水污染的治理和固体废弃物的再生利用已经是当前环境保护的重点。 - Reviewing the past, although in Gansu the regional economy is relatively narrow and backward, but because of foreign oil fathers solid foundation and higher starting point, which had a pioneering significance to oil painting development in Gansu and laid a good foundation.
回顾过去，虽然甘肃的地域经济相对偏狭与落后，但由于外来油画先辈们的坚实基础和较高的起点，对甘肃油画发展具有开拓性意义，并打下了良好的基础。 - First, the Marxism practice truth see practice as a solid logical starting point of the truth, according to that practice is the way of thinking to understand and grasp the issues of truth, and making all relevant issues gained a new understanding and interpretation.
第一，马克思主义的实践真理观以实践作为真理的坚实的逻辑起点，以实践思维方式思考和把握真理问题，使得全部有关真理的问题获得了全新的理解和阐释。 - Therefore, the study on properties of the solid conveying section was the key point in this paper.
因此，本文把对该新型挤出机固体输送段特性的研究作为重点。